MIL-W-52125B
5.2 Preservation and packaging. Preservation and packaging shall be level A, B, or C as specified (see 6.2).
5.2.1 Level A.
5.2.1.1 Sectionalization and disassembly. The unit shall be sectionalized to meet the applicable requirements of 3.17.2 or 3.17.3. In addition, components of the unit and sections vulnerable to damage, pilferage, and loss, and protruding parts that increase cubage and that can be removed and reassembled without special tools shall be removed. Removed bolts, nuts, pins, and washers shall be replaced in one of the mating parts and secured to prevent their loss.
5.2.1.2 Matchmarking. To facilitate reassembly, removed components and sections shall be matchmarked. Large sections and components shall be matchmarked identically by stencilled letters or numerals with lusterless white enamel, overcoated with varnish conforming to
TT-V-121; or identically matchmarked with paint conforming to MIL-P-13983. Small
components removed shall have matchmarking information on cloth tags conforming to
UU-T-81, type A, or on metal tags. The cloth tags shall be waterproofed in accordance with
MIL-STD-129. The tags shall be securely attached to the components so as to prevent damage to the preservation or to the components.
5.2.1.3 Preservatives. Preservatives specified herein shall conform to the applicable specification listed in and shall be applied in accordance with MIL-P-116.
5.2.1.4 Unpainted surfaces. Components of the unit such as chutes, flumes, sprockets, shafting, spray bars, springs, chock blocks, safety chains, coupling pins, towing hooks, bolts, nuts, pins, and washers, any other surface exposed by sectionalization or disassembly, and any other similar unpainted exterior metal surface not definitely specified herein requiring the application of a contact preservative in accordance with MIL-P-116, shall be coated with type P-1 preservative.
5.2.1.5 Trailer chassis and dolly components. The components of the semitrailer chassis and dolly shall be preserved and packaged in accordance with the level A (mobile) requirements of MIL-STD-281.
5.2.1.6 Gears.
5.2.1.6.1 Exposed gears. Exposed gears shall be coated with type P-l preservative or with primer conforming to TT-P-664.
5.2.1.6.2 Enclosed gears. Gears operating on lubricating oil (SAE 10, 30, or 50) shall have the housing filled to the operating level with type P-10, grade 1, 2, or 3 preservative as applicable
45
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business