MIL-W-52125 Washing And Screening Unit, Aggregate, Electric Motor Driven, 75 Ton Per Hour CapacityThis specification covers a semitrailer-mounted, pneumatic-tired, electric-motor-driven aggregate washing and screening unit with dolly.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55

MIL-W-52125B

3.32.6  Riveted connections.  Rivets shall fill the holes completely.  The upset rivet heads shall be full, neatly made, concentric with the rivet holes, and in full contact with the surface of the member, and shall be in accordance with SAE J492.

3.32.7  Machine work.  Tolerances and gages for metal fits shall conform to the limitations specified herein.

3.32.8  Forgings.  Forged components shall be in accordance with the Forging Industry

Handbook of the Forging Industry Association.

4.  QUALITY ASSURANCE PROVISIONS

4.1  Responsibility for inspection.  Unless otherwise specified in contract or purchase order, the supplier is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract or order, the supplier may use his own or other facilities suitable for the performance of the inspection requirements specified herein unless disapproved by the Government.  The Government reserves the right to perform any of the inspections are deemed necessary to assure supplies and services conform to prescribed requirements

4.1.1  Component and material inspection.  The supplier is responsible for insuring that components and materials used are manufactured, examined, and tested in accordance with referenced specifications and standards.

4.2  Classification of inspection.  Inspection shall be classified as follows:

(a)     Preproduction inspection (see 4.3).

(b)    Initial production inspection (see 4.4).

(c)     Quality conformance inspection (see 4.5).

(d)    Inspection comparison (see 4.7).

(e)     Inspection of preparation for delivery (see 4.8).

4.3  Preproduction inspection.

4.3.1  Examination.  The unit shall be examined as specified in 4.6.1.  Presence of one or more defects shall be cause for rejection.

4.3.2  Tests.  The unit shall be tested as specified in 4.6.2 through 4.6.2.6.  Failure of any test shall be cause for rejection.

38