A-A-52535
2.6.10 Lubrication. The manufacturer’s standard line oiler shall be furnished with each drill set to ensure complete lubrication during prolonged drilling operations.
2.6.11 Rotation. The drill rotation mechanism shall provide for positive drill stock rotation. Positive access to the rotation pawl springs and mechanism shall be provided.
2.6.12 Steel puller. Means shall be provided to easily disengage and remove the drill rod by hand.
2.6.13 Carrying case. The manufacturers standard carrying case or chest shall be provided. The case shall be capable of holding the drill, leader hose, maintenance tools, drills and repair parts. The wall strength and impact resistance of the case shall be comparable to that of 0.071 inch steel instruction. Means shall be provided to keep the lid in the fully open position when the drill is being removed.
2.6.14 Identification and marking. Identification and marking shall be permanent and legible and shall include as a minimum the manufacturer’s identification code (CAGE), the manufacturer’s part number, the part or identification number (PIN) AA52535-1, and the national stock number (NSN) (see 6.2).
2.6.15 Treatment and painting. The portion of the drill and the component normally painted shall be cleaned and painted for a one coat finish. The color shall be dark green (see 6.2).
3. REGULATORY REQUIREMENTS
3.1 Recovered material. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.402 of the Federal Acquisition Regulations (FAR).
4. QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspection. The contractor is responsible for the performance of all inspections (examinations and tests).
4.2 Contractor certification. The contractor shall certify and maintain substantiating evidence that, the product offered meets the salient characteristics of this CID and that the product conforms to the producer’s own drawings, specifications, workmanship standards and quality assurance practices. Items with known defects shall not be submitted for Government acceptance. The Government reserves the right to require proof of such conformance prior to the first delivery and thereafter as maybe otherwise provided for under the provisions of the contract.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business